Multifunctional UHT Milk Processing Line With Aseptic Brick Carton
Package
DESCRIPTION:
With a product that can be stored for long periods without spoiling
and with no need for refrigeration, there are many advantages for
both the producer, the retailer and the consumer. This includes
expensive products such as cream, desserts and sauces. In a modern
UHT plant (Ultra High Temperature) the milk is pumped through a
closed system. On the way it is preheated, highly heat treated,
homogenised, ultra highly heat treated, cooled and packed
aseptically. Low acid (pH above 4.5 – for milk more than pH 6.5)
liquid products are usually treated at 135 – 150C for a few seconds
holding, by either indirect heating or direct steam injection or
infusion. High acid (pH below 4.5) products such as juice are
normally heated at 90 – 95C for 15 – 30 seconds holding. All parts
of the system downstream of the actual highly heating section are
of aseptic design to eliminate the risk of reinfection, include
aseptic packaging in packages protecting the product against light
and atmospheric oxygen. Ambient storage is normal.
Specification:
| Raw material | Liquid cow milk, goat milk, camel milk, milk powder dissolving with
water |
| Product | Pasteurized milk, UHT milk, yogurt, milk powder, flavored milk,
milk drink, sour milk, butter, cheese and so on. |
| Capacity | 1T-50T/D |
| Product package | Aseptic pouch, gable top box, carton, plastic bottle, plastic cup,
glass bottle, plastic pouch, bulk, according to customer’s
requirement |
| Service | Turnkey project service: designing, manufacturing, installation,
commissioning, training, after-sale service and so on. |
Direct Vertical Milk Cooling Storage Tank
The machien is laying vertical cooling milk pot is used in cooling
to storage sweat milk or other liquid .It absorbs international
advanced technology adopts importing compress machine and safety
and system,micro computer monitor,imported advanced technique and
equipment such as polyurethane bubling,honeycomb board
evaporator.So it is the ideal cooling and storage equipment for
pasture,milk factory,food factory and beverage factore an d phamacy
industry.
| NARMAL VALUME | 2000L |
| LENGTH | 1000mm |
| POTBODY WIDTH | 1260mm |
| HEIGHT | 1510mm |
| WEIGHT | 640kg |
| AGITATOR | 1.1kw |
| AGITATOR RETURNING SPEED | 35kw |
Various UHT systems:
There are two main types of UHT systems on the market.
- In the direct systems the product comes in direct contact with
the heating medium, followed by flash cooling in a
vacuum vessel and eventually further indirect cooling to packaging
temperature. The direct systems are divided into:
• steam injection systems (steam injected into product),
• steam infusion systems (product introduced into a steam-filled
vessel).
- In the indirect systems the heat is transferred from the heating
media to the product through a partition (plate or
tubular wall). The indirect systems can be based on:
• plate heat exchangers,
• tubular heat exchangers,
• scraped surface heat exchangers,
Furthermore it is possible to combine the heat exchangers in the
direct systems according to product and process requirements. The
figure below is an indirect system - tubular UHT plant as an
example.
